Malmet Instrument & Anaesthetic Apparatus ...

Malmet - Instrument & Anaesthetic Apparatus Drying Cabinet

Supplier: Babich Maintenance and Steriliser Services

Instrument & Anaesthetic Apparatus Drying Cabinet

The Drying Cabinet is designed for efficient drying of surgical instruments, respiratory tubing, masks, and ancillary equipment in healthcare settings.

Versatile, high-capacity drying for surgical instruments and equipment.

Features

Designed for drying surgical instruments, respiratory tubing, face masks, and ancillary healthcare equipment
Handles large loads with any combination of tubes, masks, and parts
Connects to standard hospital power outlets (240V, 15A)
Compact design with double wall stainless steel construction and double glazed doors
Dual over-temperature cut-out, factory pre-set temperature of 70°C, secondary high limit at 85°C
Available as “Pass Through” models
Multiple configurations:
- Front load with 6 half width wire shelves and 2 racks of 18 x 37mm diameter tube holders
- Front load with 6 full width wire shelves (no tube holders)
- Front load (full hanging) with 5 racks of 18 x 37mm diameter tube holders
- Front load & rear unload options
Automatic Damper Control to vent air to atmosphere
Compliance to AS 2514, AS2774 standards

Unit Specifications

Electrical Rating	240V, 1 phase, 50Hz, 13.8A
Electrical Connection	IEC power cord with 3 pin plug, 15A (standard GPO)
Heating Elements	2 x 1500W
Over-temp Cut-out Protection	Manual reset thermostat at 90°C, automatic cutout at 5°C above set point, secondary auto-reset at 85–90°C
Temperature Control	Microprocessor control, incremental 1°C steps from factory set at 50°C to max 70°C
Air Circulation & Filtration	98mm external vent spigot, 150 x 150 x 15mm washable filter, automatic damper control
Material	304/4 stainless steel cabinet, silicon rubber door gasket
Door Type	Bi-parting doors protruding 330mm when open, double glazed
Dimensions (Front Load)	1,750mm (H) x 750mm (W) x 640mm (D)
Dimensions (Pass Through)	1,750mm (H) x 750mm (W) x 690mm (D)
Shipping Weight	185 kg

Accessories

Anaesthetic Bag Holder
Tube Holder Rack
Full Width Wire Shelf
Part Width Wire Shelf
Door lock bolt assembly (fitted in factory)

To contact Babich Maintenance and Steriliser Services about Malmet Instrument & Anaesthetic Apparatus Drying Cabinet use Get a quote.

Features

Designed for drying surgical instruments, respiratory tubing, face masks, and ancillary healthcare equipment
Handles large loads with any combination of tubes, masks, and parts
Connects to standard hospital power outlets (240V, 15A)
Compact design with double wall stainless steel construction and double glazed doors
Dual over-temperature cut-out, factory pre-set temperature of 70°C, secondary high limit at 85°C
Available as “Pass Through” models
Multiple configurations:
- Front load with 6 half width wire shelves and 2 racks of 18 x 37mm diameter tube holders
- Front load with 6 full width wire shelves (no tube holders)
- Front load (full hanging) with 5 racks of 18 x 37mm diameter tube holders
- Front load & rear unload options
Automatic Damper Control to vent air to atmosphere
Compliance to AS 2514, AS2774 standards

Unit Specifications

Electrical Rating	240V, 1 phase, 50Hz, 13.8A
Electrical Connection	IEC power cord with 3 pin plug, 15A (standard GPO)
Heating Elements	2 x 1500W
Over-temp Cut-out Protection	Manual reset thermostat at 90°C, automatic cutout at 5°C above set point, secondary auto-reset at 85–90°C
Temperature Control	Microprocessor control, incremental 1°C steps from factory set at 50°C to max 70°C
Air Circulation & Filtration	98mm external vent spigot, 150 x 150 x 15mm washable filter, automatic damper control
Material	304/4 stainless steel cabinet, silicon rubber door gasket
Door Type	Bi-parting doors protruding 330mm when open, double glazed
Dimensions (Front Load)	1,750mm (H) x 750mm (W) x 640mm (D)
Dimensions (Pass Through)	1,750mm (H) x 750mm (W) x 690mm (D)
Shipping Weight	185 kg

Accessories

Anaesthetic Bag Holder
Tube Holder Rack
Full Width Wire Shelf
Part Width Wire Shelf
Door lock bolt assembly (fitted in factory)

Read less...

To contact Babich Maintenance and Steriliser Services about Malmet Instrument & Anaesthetic Apparatus Drying Cabinet use Get a quote.

Let Babich Maintenance and Steriliser Services provide you with a quote

Supplier

Supplier: Babich Maintenance and Steriliser Services

Location: Jandakot , WA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Babich Maintenance and Steriliser Services are also proudly displaying these credentials:

Location:

Jandakot , WA

Joined:

Apr 2026

Level:

Economy Storefront

Verified:

Is this your product? Manage products / company details |

Report this product