Abco Gynaecological Chair | G35

Abco - Gynaecological Chair | G35

Supplier: I. D. Stewart

Gynaecological Chair | G35

This is designed for bigger patients (250kg lifting) as general purpose examination and treatment chair for Gynaecology and similar modalities

In Stock

Features of this product

The ABCO G35 Gynae Chair is an Australian manufactured couch using 2 "Linak" column motor units manufactured in Denmark
This is designed for bigger patients (250kg lifting) as general purpose examination and treatment chair for Gynaecology and similar modalities
This chair has the option of 100mm lockable castors
The electric control of the height (56 to 96cm), seat (20deg. tilt) and backrest (up to 80deg.) can be controlled by the foot switch from the front of the chair
The foot pads can be removed and the 47cm long extension section fitted to make a flat couch. There is the option of Lithotomy Knee Supports which exchange with the foot pads
Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a plywood board. The standard width is 56cm. The footprint of this chair is 92cm x 56cm.
By using the 2 column motor system there is no horizontal shift as the chair travels from minimum to maximum height

Specifications of this product

ITEM	SPECIFICATION
Couch dimensions	1900 x 560mm, footprint 92cm x 56cm.
Height range	560 - 960mm, tilt to 20deg.
Lift motor	"Linak" European motor
Lifting capacity	250kg
Triple foot switch	24v DC
ARTG No	1237543
Frame	Heavy steel plate powder coated "Precious Silver Pearl".
Height lift mechanism	dual column
Supply voltage	230v ac 59Hz 1.5amp
Motor operating voltage	24v DC (70VA)
Shipping dimensions	190x60x60cm 90kg
Manufacturer	ABCO Health Care, Australia

To contact I. D. Stewart about Abco Gynaecological Chair | G35 use Get a quote.

Features of this product

The ABCO G35 Gynae Chair is an Australian manufactured couch using 2 "Linak" column motor units manufactured in Denmark
This is designed for bigger patients (250kg lifting) as general purpose examination and treatment chair for Gynaecology and similar modalities
This chair has the option of 100mm lockable castors
The electric control of the height (56 to 96cm), seat (20deg. tilt) and backrest (up to 80deg.) can be controlled by the foot switch from the front of the chair
The foot pads can be removed and the 47cm long extension section fitted to make a flat couch. There is the option of Lithotomy Knee Supports which exchange with the foot pads
Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a plywood board. The standard width is 56cm. The footprint of this chair is 92cm x 56cm.
By using the 2 column motor system there is no horizontal shift as the chair travels from minimum to maximum height

Specifications of this product

ITEM	SPECIFICATION
Couch dimensions	1900 x 560mm, footprint 92cm x 56cm.
Height range	560 - 960mm, tilt to 20deg.
Lift motor	"Linak" European motor
Lifting capacity	250kg
Triple foot switch	24v DC
ARTG No	1237543
Frame	Heavy steel plate powder coated "Precious Silver Pearl".
Height lift mechanism	dual column
Supply voltage	230v ac 59Hz 1.5amp
Motor operating voltage	24v DC (70VA)
Shipping dimensions	190x60x60cm 90kg
Manufacturer	ABCO Health Care, Australia