Jess fully automates the process of protein separation and immunodetection, offering rapid, reproducible, and quantitative protein analysis with minimal hands-on time.

Completely automates protein quantitation and analysis, delivering fast, highly reproducible results.

Features

Automated protein separation and immunodetection streamlining traditional Western blotting workflows
Highly reproducible results with intra-assay CVs <15%
Quantitative immunoassay-level data with chemiluminescent and fluorescent detection options
Programmable for fully hands-free operation: load your plate, press start, and return to analysed data in under 3 hours
Supports multiplexing—detect multiple proteins in a single run using fluorescence capabilities
Sensitive detection down to picogram levels, ideal for precious or low-abundance samples
Reliable protein normalisation with dedicated reagents or total protein measurement
Comprehensive data analysis: qualitative (Western blot-style) and quantitative (standard curves, protein concentration)
Imaging system supports both capillary-based assays and traditional Western blot membranes
High throughput: available in 13 or 25 sample capillary cartridges

Applications

Protein quantification and expression analysis
Multiplex detection for multi-target studies
Total protein and target protein normalisation
Analysis of protein isoforms and post-translational modifications
Direct visualisation and quantification with automated software analysis

Specifications

Parameter	Details
Power	US/CAN 120V AC, 60Hz, 4.2A; Europe 240V AC, 50Hz, 2.1A; Japan 100V AC, 50/60Hz, 5.0A
Operating temperature	18–24°C
Operating humidity	20–60% relative, non-condensing
Quantitation CV	<15%
Throughput	13 or 25 samples per run
Runtime	<3 hours (RePlex: 5 hours)
Sample volume required	3 µL/well
Sample amount required	0.3–1.2 µg for total protein, 0.6–1.2 µg for chemiluminescence, 2–4 µg for fluorescence
Sensitivity	High pg–ng (chemiluminescence), low pg (fluorescence)
Dynamic range	2–4 logs depending on application
Size range	2–440 kDa molecular weight ladder
Resolution	±15–20% for MW<20kDa, ±10% for MW>20kDa
Dimensions (closed)	0.36 m (H) x 0.3 m (W) x 0.57 m (D)
Dimensions (open)	0.36 m (H) x 0.53 m (W) x 0.57 m (D)
Weight	23 kg
Capillary size	5 cm, 100 µm, 400 nL

Detection Methods

Chemiluminescence: High-sensitivity detection suitable for low-abundance targets.
Fluorescence: Enables multiplex detection and two-colour analysis for comprehensive profiling.
Protein Normalisation: Dedicated reagents for accurate comparative analysis.
Blot Imaging: Imaging of traditional Western blotting membranes supported.

Features

Automated protein separation and immunodetection streamlining traditional Western blotting workflows
Highly reproducible results with intra-assay CVs <15%
Quantitative immunoassay-level data with chemiluminescent and fluorescent detection options
Programmable for fully hands-free operation: load your plate, press start, and return to analysed data in under 3 hours
Supports multiplexing—detect multiple proteins in a single run using fluorescence capabilities
Sensitive detection down to picogram levels, ideal for precious or low-abundance samples
Reliable protein normalisation with dedicated reagents or total protein measurement
Comprehensive data analysis: qualitative (Western blot-style) and quantitative (standard curves, protein concentration)
Imaging system supports both capillary-based assays and traditional Western blot membranes
High throughput: available in 13 or 25 sample capillary cartridges

Applications

Protein quantification and expression analysis
Multiplex detection for multi-target studies
Total protein and target protein normalisation
Analysis of protein isoforms and post-translational modifications
Direct visualisation and quantification with automated software analysis

Specifications

Parameter	Details
Power	US/CAN 120V AC, 60Hz, 4.2A; Europe 240V AC, 50Hz, 2.1A; Japan 100V AC, 50/60Hz, 5.0A
Operating temperature	18–24°C
Operating humidity	20–60% relative, non-condensing
Quantitation CV	<15%
Throughput	13 or 25 samples per run
Runtime	<3 hours (RePlex: 5 hours)
Sample volume required	3 µL/well
Sample amount required	0.3–1.2 µg for total protein, 0.6–1.2 µg for chemiluminescence, 2–4 µg for fluorescence
Sensitivity	High pg–ng (chemiluminescence), low pg (fluorescence)
Dynamic range	2–4 logs depending on application
Size range	2–440 kDa molecular weight ladder
Resolution	±15–20% for MW<20kDa, ±10% for MW>20kDa
Dimensions (closed)	0.36 m (H) x 0.3 m (W) x 0.57 m (D)
Dimensions (open)	0.36 m (H) x 0.53 m (W) x 0.57 m (D)
Weight	23 kg
Capillary size	5 cm, 100 µm, 400 nL

Detection Methods

Chemiluminescence: High-sensitivity detection suitable for low-abundance targets.
Fluorescence: Enables multiplex detection and two-colour analysis for comprehensive profiling.
Protein Normalisation: Dedicated reagents for accurate comparative analysis.
Blot Imaging: Imaging of traditional Western blotting membranes supported.

Read less...

To contact In Vitro Technologies about Jess Automated Protein Analysis System use Get a quote.

Let In Vitro Technologies provide you with a quote

Supplier

Supplier: In Vitro Technologies

Location: Noble Park North, VIC

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. In Vitro Technologies are also proudly displaying these credentials:

Location:

Noble Park North , VIC

Joined:

Jul 2026

Level:

Premium Storefront

Verified: