Dental Drill | AnyOne Surgical Kit
[Surgical Kit Components]
Initial Drill
• Used to pierce the cortical bone initially.
• Advisable to go into the bone to the full length of a fixture.
Shaping Drill
• Each drill has depth marking lines from 7.0mm to 15.0mm.
• The dual marking system(grooves and laser markings) provides visual and
radiographic depth verification during surgery.
• TiN coating on drills: Enhanced corrosion resistance and abrasion resistance.
? Actual drill length: Drill length does not normally include the Y dimension
of the drill.
? Markings on the Shaping Drill are 0.5mm longer than the fixture.
So fixtures will automatically be placed 0.5mm subcrustal if the drilling
protocol is followed.
Dense Drill
• To control initial stability in dense bone(type I & II), use the Dense Drill
to remove and shape the cortical bone.
Handpiece Connector
• Used with Handpiece to remove fixture from ampule and to place the fixture.
• Spring type connection allows for easy and secure pick-up and positioning
of the fixture.
• The first mark on the shaft indicate the position of the fixture platform,
For the second mark, the bottom of the black line is 3mm and the top of the
black line is 4mm (from fixture platform).
• Especially useful in flapless surgery.
Ratchet Connector
• Used for inserting or removing a fixture with the Ratchet Wrench.
• Check to make sure the Ratchet Connector is completely seated into the Ratchet Wrench before using.
• Excessive force can cause damage to internal hex of fixture.
• Marks on the shaft indicate the position of fixture platform. Bottom of the black line is 3mm and top of black line is 4mm(from fixture platform).
• Especially useful in flapless surgery
Final Driver
• Used to attach or remove the fixture by connecting to Ratchet Wrench
• Used to mount the Ratchet Connector fully on the Ratchet Wrench
Hand Driver(1.2 Hex)
• Used for all Cover Screws, Abutment Screws, and Healing Abutments.
• Available in 4 lengths for added convenience.
• Hand Driver can be directly inserted into the Torque Wrench without using an adaptor.
• Hex tip can with stand 35-45Ncm of torque without distorting.
Hand Driver(0.9 Hex)
• Used for AnyOne External fixture cover screw.
• Available in 3 lengths for convenience.
• Hand Driver can be directly inserted in the to Torque Wrench without using an adaptor.
• Hex tip can with stand 25-35Ncm of torque without distorting.
Drill Extension
• No more than 35Ncm torque: May distorted when excessive force is applied.
• Extends drills & other handpiece instruments.
Direction Indicator
• Confirms drilling direction and functions as a parallel guide for additional
osteotomies.
• Each end of the Direction Indicator has a different diameter
Path Finder
• After the fixture is placed, a Path Finder may be connected into the fixture and
function as a parallel guide for additional osteotomies.
• Grooves indicate the distance from the fixture platform. The first groove is
0.3mm and the second groove is 1mm, especially useful in flapless surgery.
Ratchet Wrench
• Used to exert more force than the Handpiece.
• No bearing system : No breakage and no corrosion problems.
• Arrow laser marking indicates direction of the force.
To contact Dental Dynamics Australia about Dental Drill | AnyOne Surgical Kit use Get a quote.
[Surgical Kit Components]
Initial Drill
• Used to pierce the cortical bone initially.
• Advisable to go into the bone to the full length of a fixture.
Shaping Drill
• Each drill has depth marking lines from 7.0mm to 15.0mm.
• The dual marking system(grooves and laser markings) provides visual and
radiographic depth verification during surgery.
• TiN coating on drills: Enhanced corrosion resistance and abrasion resistance.
? Actual drill length: Drill length does not normally include the Y dimension
of the drill.
? Markings on the Shaping Drill are 0.5mm longer than the fixture.
So fixtures will automatically be placed 0.5mm subcrustal if the drilling
protocol is followed.
Dense Drill
• To control initial stability in dense bone(type I & II), use the Dense Drill
to remove and shape the cortical bone.
Handpiece Connector
• Used with Handpiece to remove fixture from ampule and to place the fixture.
• Spring type connection allows for easy and secure pick-up and positioning
of the fixture.
• The first mark on the shaft indicate the position of the fixture platform,
For the second mark, the bottom of the black line is 3mm and the top of the
black line is 4mm (from fixture platform).
• Especially useful in flapless surgery.
Ratchet Connector
• Used for inserting or removing a fixture with the Ratchet Wrench.
• Check to make sure the Ratchet Connector is completely seated into the Ratchet Wrench before using.
• Excessive force can cause damage to internal hex of fixture.
• Marks on the shaft indicate the position of fixture platform. Bottom of the black line is 3mm and top of black line is 4mm(from fixture platform).
• Especially useful in flapless surgery
Final Driver
• Used to attach or remove the fixture by connecting to Ratchet Wrench
• Used to mount the Ratchet Connector fully on the Ratchet Wrench
Hand Driver(1.2 Hex)
• Used for all Cover Screws, Abutment Screws, and Healing Abutments.
• Available in 4 lengths for added convenience.
• Hand Driver can be directly inserted into the Torque Wrench without using an adaptor.
• Hex tip can with stand 35-45Ncm of torque without distorting.
Hand Driver(0.9 Hex)
• Used for AnyOne External fixture cover screw.
• Available in 3 lengths for convenience.
• Hand Driver can be directly inserted in the to Torque Wrench without using an adaptor.
• Hex tip can with stand 25-35Ncm of torque without distorting.
Drill Extension
• No more than 35Ncm torque: May distorted when excessive force is applied.
• Extends drills & other handpiece instruments.
Direction Indicator
• Confirms drilling direction and functions as a parallel guide for additional
osteotomies.
• Each end of the Direction Indicator has a different diameter
Path Finder
• After the fixture is placed, a Path Finder may be connected into the fixture and
function as a parallel guide for additional osteotomies.
• Grooves indicate the distance from the fixture platform. The first groove is
0.3mm and the second groove is 1mm, especially useful in flapless surgery.
Ratchet Wrench
• Used to exert more force than the Handpiece.
• No bearing system : No breakage and no corrosion problems.
• Arrow laser marking indicates direction of the force.
To contact Dental Dynamics Australia about Dental Drill | AnyOne Surgical Kit use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product